Product description
M1 intelligent signal booster + Wi-Fi6 is a indoor coverage equipment, which can improve network speed of the whole room and provide services for all residents in large multi-storey residence, with a coverage area of 500 square meters. With its enhanced cellular network coverage, it can easily handle the connections of multiple operators’different systems and easily provide cellular voice services and data communication services for all users, allowing them to enjoy less dropped calls and better voice quality.
Besides, it supports Wi Fi 6 function, provides 1167Mbps wireless rate, APP cloud management, view connected devices and internet speed at any time, quickly troubleshoot, create visitor network, etc.
Product features
Digital ALC
The intelligent micro broadband repeater has digital ALC function inside, and the dynamic automatic adjustment range of gain exceeds 20dB
Uplink and downlink gain automatic linkage
The system will automatically detect the input power and adjust the uplink and downlink gain to ensure the performance and amplification balance of the system
Isolation detection
The system will automatically detect the isolation of the antenna and automatically control the equipment to reduce the gain until the equipment does not generate amplified self excitation, so as to protect equipment safety and network from interference
Real-time power indication
The downlink output power of automatic detection equipment provides real-time indication for good communication environment and coverage
Uplink shutdown timing restart
Automatically detect the isolation of the two antennas and control output power to ensure no interference and noise to the network
New Wi-Fi6 standard and MU-MIMO technology
The new Wi-Fi6 standard has dual frequency concurrency and full gigabit network port to enjoy smooth surfing. MU-MIMO technology enables the equipment to serve multiple devices at the same time by multi-hop antenna. Each device has the highest priority treatment, allowing users to enjoy smooth internet.
Support seamless roaming and smooth WiFi switching
It supports seamless roaming, which can ensure the smooth switching of mobile phones, iPads and other terminals between different signal nodes, smoother voice, video calls, and online games.
App remote management, everything is under control
It also supports APP cloud management. Through remote management of mobile app, it can automatically detect potential vulnerabilities, prevent peeping and Wi-Fi piggyback, ensuring the security of home network.
Coverage
If the outdoor signal strength is |
Covered area |
●●●●● - below 89db |
Up to 300 square meters |
5 bar signal |
|
|
|
●●●●○-90 dB |
Up to 200 square meters |
3-4 bar signal |
|
|
|
●●○○○-100 dB |
Up to 100 square meters |
1-2 bar signal |
|
|
|
○○○○○ |
Unable to work |
No signal |
|
Hardware specifications
Working frequency |
Uplink:1710~1785MHz |
Downlink:1805~1880MHz |
Gain |
58±5dB |
63±5dB |
Passband Ripple (dB) |
≤8dB |
|
Maximum output power |
20±2dBm |
18±2dBm |
Noise figure |
≤6dB |
|
EVM |
≤5% |
|
Input power range |
≤-25dBm |
|
Spurious emission |
9KHz~1GHz |
≦-36dBm/100KHz |
1GHz~12.75GHz |
≦-30dBm/1MHz |
|
Automatic level control (ALC) |
When the increased input signal level does not exceed 10dB, the output power shall be kept within ± 2dB of the maximum output power; When the input signal level increases by more than 10dB, the output power shall be kept within ± 2dB of the maximum output power or the output shall be turned off |
|
Time-lag |
≤0.5us |
|
VSWR |
≤2.5 |
|
Input and output impedance |
50 ohms |
|
Maximum power consumption |
≤4W |
|
SoC |
MT7621A+MT7905DN(2.4GHz 2X2 + 5GHz 2X2 11ax) |
|
Flash |
16MBx1 SPI NOR flash |
|
Memory |
DDR3 128MB 1200Mbps |
|
Operating frequency band |
2.4-2.4835 GHz;5.15-5.850GHz |
|
Wireless rate |
2G:573.5Mbps 5G:1201Mbps |
|
Maximum output power (single channel) |
2.4G radio:19dBm |
|
5G radio:17dBm |
||
LED indicator |
Red-white light |
|
|
LANX3:10M/100M/1000M Ethernet |
|
External physical interface |
WANX1:10M/100M/1000M Ethernet |
|
|
RESET buttonX1 |
|
Input voltage |
12V 2A |
|
Working ambient temperature |
-10-45℃ |
|
Relative humidity of working environment |
5%-95% |
Ordering information
Model |
Description |
M1 |
intelligent signal booster+Wi-Fi 6 |
Statement: due to iteration of products, relevant product specifications and physical information are based on the latest version, and the final interpretation right belongs to Shenzhen MOBI Network Communication Co., Ltd.
Shenzhen MOBI Network Communication Co., Ltd www.mobi-network.com
Add:North side of the second floor of MOBI building, No. 17, Keji North 1st Road, Xili street, Nanshan District, Shenzhen
Tel:86-0755-86186100
Fax:86-0755-86141409
Zip code:518057