1 Overview
1.1 Brief introduction
The document describes the electrical characteristics, RF performance, size and application environment of MB600. With the introduction of this document, end users or developers can quickly understand the hardware functions of MB600.
MB108-BKC gets dial-up accesse to internet through 1000Mbps WAN port, and shares network through wireless WiFi 6 and wired LAN 1000Mbps.
1.2 Reference standards
Relevant standard specification:
l USB3.0/USB2.0 bus standard
l IEEE802.11n/g/b/a/ac/ax
l IEEE802.3/802.3u/802.ab
2 Product pictures
3 Main features
l Adopt IPQ8072A scheme, 4-core ARM Cortex A53s CPU, with basic frequency up to2.2 GHz
l Use independent WIFI chip, 2.4G:QCN5024, 5.8G:QCN5054
l The 2.4G rate is up to 1147Mbps and 5.8G rate is up to 2402Mbps, collectively referred to as 3600 Mbps
l Support MU-MIMO, WIFI modulation mode supports 1024-QAM and OFDMA
l Each WIFI channel is independently equipped with high-power FEM and matched with high-gain antenna to realize wide WiFi coverage
l Adopt high speed 1GB DDR4, matched with 8MB Nor Flash and 256MB NAND storage
l 1WAN、2LAN full 1000M adaptive network port, Auto MDIMDIX (Auto MDI/MDIX)
l IPQ8072 has its own watchdog function, which automatically restarts in case of crash
l When multiple products are used at the same time, MESH automatic networking is supported
4 Hardware features
4.1 Introduction to hardware interface
|
Network port |
1 WAN port, 1000Mbps Auto MDIMDIX (Auto MDI/MDIX) in accordance with IEEE 802.3/802.3u/802.ab |
|
2 LAN port, 1000Mbps Auto MDIMDIX (Auto MDI/MDIX) in accordance with IEEE 802.3/802.3u/802.ab |
|
|
Power interface |
DC5.5*2.1MM interface |
|
Press-button |
1 reset button |
|
Touch MESH button, and the sensing area is located at the top indicator |
|
|
Antenna |
4 omnidirectional 5dbi 2.4G antenna, 4 omnidirectional 5dbi 5.8G antenna |
|
4 omnidirectional 5dbi 5G mobile communication antennas, compatible with 4G/3G/2G frequency point |
4.2 Introduction to indicator light
|
LAN1 LED |
After connected, the light is always on and flashes when there is data communication, integrated in the upper left of RJ45 network port |
|
LAN2 LED |
After connected, the light is always on and flashes when there is data communication, integrated in the upper left of RJ45 network port |
|
WAN LED |
After connected, the light is always on and flashes when there is data communication, integrated in the upper left of RJ45 network port |
|
NET LED |
1. The red light is on during startup, and green light is on after startup 2. Press the mesh button to enter mesh pairing state, the green light flashes once a second, with other lights not on 3. 3. The network of main equipment is normal, and the green light and blue light are on at the same time (cyan) 4. 4. After successfully connected to MESH, the green light and red light will be on at the same time (orange) if the distance is far, the green light and blue light will be on at the same time (cyan) if the distance is suitable. |
4.3 Introduction to hardware platform
|
Processor |
IPQ8072A 4-core ARM Cortex A53s CPU, 2.2GHZ basic frequency |
|
2.4G WIFI chip |
QCN5024 IEEE 802.11ax/n/g/b, MAX SPEED1147Mbps,4T4R |
|
5.8G WIFI chip |
QCN5054 IEEE 802.11ax/ac/a, MAX SPEED2402Mbps,4T4R |
|
Internal storage |
DDR4 1GB |
|
Flash Memory |
Nor Flash 8MB+256MB NAND |
6 Introduction to WIFI parameters
6.1 WIFI 2.4G
Compatible with IEEE 802.11b/g/n/ac/ax, supporting 20MHz or 40MHz, modulation mode 1024-QAM / OFDMA, adopt antenna technology 4T4R MU-MIMO, with maximum connection rate up to 1147Mbps. The following is the description of operating frequency, receiving sensitivity and transmitting power of 2.4G WIFI.
|
|
Description |
Maximum |
Rating |
Mimimum |
Unit |
|
Operating frequency |
|
2484 |
|
2412 |
MHz |
|
Receiving sensitivity |
802.11B 11Mbps |
-86 |
-87 |
-88 |
dBm |
|
802.11G 54 Mbps |
-72 |
-74 |
-76 |
dBm |
|
|
802.11N HT20@ MCS7 |
-70 |
-72 |
-74 |
dBm |
|
|
802.11N HT40@ MCS7 |
-70 |
-72 |
-74 |
dBm |
|
|
802.11AC VHT20@ MCS8 |
-68 |
-70 |
-72 |
dBm |
|
|
802.11AC VHT40@ MCS9 |
-66 |
-68 |
-70 |
dBm |
|
|
802.11AX HE20@MCS11 |
-66 |
-68 |
-70 |
dBm |
|
|
802.11AX HE40@MCS11 |
-64 |
-65 |
-76 |
dBm |
|
|
Transmitting power |
802.11B 11Mbps |
26 |
25 |
24 |
dBm |
|
802.11G 54 Mbps |
24 |
23 |
22 |
dBm |
|
|
802.11N HT20@ MCS7 |
23 |
22 |
21 |
dBm |
|
|
802.11N HT40@ MCS7 |
22 |
21 |
20 |
dBm |
|
|
802.11AC VHT20@ MCS8 |
22 |
21 |
20 |
dBm |
|
|
802.11AC VHT40@ MCS9 |
21 |
20 |
19 |
dBm |
|
|
802.11AX HE20@MCS11 |
21 |
20 |
19 |
dBm |
|
|
802.11AX HE40@MCS11 |
20 |
19 |
18 |
dBm |
6.2 WIFI 5.8G
Compatible with IEEE 802.11 a/an/ac/ax, supporting 20MHz, 40MHz, 80MHz, modulation mode 1024-QAM / OFDMA; It adopts antenna technology 4T4R MIMO, with maximum connection rate up to 2402Mbps. The following is the description of operating frequency, receiving sensitivity and transmitting power of 5.8G WIFI.
|
|
Description |
Maximum |
Rating |
Minimum |
Unit |
|
Operating frequency |
|
5825 |
|
5180 |
MHz |
|
Receiving sensitivity |
802.11G 54 Mbps |
-72 |
-73 |
-74 |
dBm |
|
802.11N HT20@ MCS7 |
-70 |
-72 |
-74 |
dBm |
|
|
802.11N HT40@ MCS7 |
-70 |
-72 |
-74 |
dBm |
|
|
802.11AC VHT20@ MCS8 |
-68 |
-70 |
-72 |
dBm |
|
|
802.11AC VHT40@ MCS9 |
-66 |
-68 |
-70 |
dBm |
|
|
802.11AC VHT80@ MCS9 |
-62 |
-64 |
-66 |
dBm |
|
|
802.11AX HE20@MCS 11 |
-66 |
-68 |
-70 |
dBm |
|
|
802.11AX HE40@MCS 11 |
-62 |
-64 |
-66 |
dBm |
|
|
802.11AX HE80@MCS 11 |
-60 |
-62 |
-64 |
dBm |
|
|
Transmitting power |
802.11G 54 Mbps |
24 |
23 |
22 |
dBm |
|
802.11N HT20@ MCS7 |
23 |
22 |
21 |
dBm |
|
|
802.11N HT40@ MCS7 |
22 |
21 |
20 |
dBm |
|
|
802.11AC VHT20@ MCS8 |
21 |
20 |
19 |
dBm |
|
|
802.11AC VHT40@ MCS9 |
20 |
19 |
18 |
dBm |
|
|
802.11AC VHT80@ MCS9 |
19 |
18 |
17 |
dBm |
|
|
802.11AX HE20@MCS 11 |
21 |
20 |
19 |
dBm |
|
|
802.11AX HE40@MCS 11 |
20 |
19 |
18 |
dBm |
|
|
802.11AX HE80@MCS 11 |
19 |
18 |
17 |
dBm |
6.3 WIFI EVM indicator
|
|
Mode description |
Parameters |
Unit |
|
EVM indicator |
802.11B 11Mbps |
≤ -1 5 dB |
dBm |
|
802.11G 54 Mbps |
≤ -25 dB |
dBm |
|
|
802.11N HT20@ MCS7 |
≤ -28 dB |
dBm |
|
|
802.11N HT40@ MCS7 |
≤ -28 dB |
dBm |
|
|
802.11AC VHT20@ MCS8 |
≤ -30 dB |
dBm |
|
|
802.11AC VHT40@ MCS9 |
≤ -32 dB |
dBm |
|
|
802.11AC VHT80@ MCS9 |
≤ -32 dB |
dBm |
|
|
802.11AX HE20@MCS 11 |
≤ -35 dB |
dBm |
|
|
802.11AX HE40@MCS 11 |
≤ -35 dB |
dBm |
|
|
802.11AX HE80@MCS 11 |
≤ -35dB |
dBm |
7 Power supply and consumption
|
|
Test conditions |
Minimum |
Rating |
Maximum |
Unit |
|
Working voltage |
T A = 25°C |
6 |
12 |
14 |
V |
|
Absolute working voltage |
T A = 25°C |
5.5 |
|
16 |
V |
|
Working current |
VIN=12V, T A = 25°C |
0.8 |
1.5 |
2.5 |
A |
Please use MB standard power adapter to supply power to the product. If you do not use it, please supply power to this product in strict accordance with the above power specifications and parameters, otherwise the product will be damaged. If the battery or vehicle power supply is used, please notice anti-static and anti-surge countermeasures.
8 Introduction to structural parameters and accessories
|
Weight (KG) |
TBD |
|
|
Outer covering size |
104.6*104.6*217MM |
|
|
Color |
Black |
|
|
Accessories |
Power adapter |
12V/2.5A 1PCS |
|
Instruction |
1PCS |
|
|
Certificate |
1PCS |
|
|
Network cable |
HSYV 1PCS |
|
|
SIM card cover |
1PCS |
|
9 Working environment requirements
|
Working temperature |
0℃ - 40℃ |
|
Storage temperature |
-40℃- 70℃ |
|
Operation humidity |
10% - 90%RH Non-condensing |
|
Storage humidity |
5% - 90%RH Non-condensing |
10 Software configuration
|
Default IP |
192.168.1.1 |
|
User name / password |
root/admin |
|
2.4G SSID |
WIFI6-XXXXXX (X is the latter 6 bits of MAC address), No password by default |
|
5.8G SSID |
WIFI6-5G-XXXXXX (X is the latter 6 bits of MAC address), No password by default |
The above is the general default configuration of the product. The WIFI SSID using our OS firmware or OPENWRT firmware may be different, but the default IP and WEB login name and password of the product remain the same. Please refer to product description for other detailed software functions.
